Hello.. First post. Great forum! Picked up a 1997 Ranger 2.3 w/ 26,000 miles last year and decided last weekend to drop thetransmission pan, replace the filter, and do a flush through the cooling lines as it had the original fluid still in it. Everything went pretty well but when I refilled it with fluid I can't seem to get an accurate reading on the dipstick. I added approximately what I took out and drove through the gears a bit to circulate the new fluid and checked while in park at idle. The dipstick was dry. It was late so I let it sit overnight and in the morning the "cold" level was at the top of the two dots at the bottom of the dipstick..right where it should be. I drove a little bit and the trans was slipping so I rechecked the hot level and again it was dry. Added about another quart and it finally showed up on the dipstick at the bottom of the crosshatch area. Figured I was good to go..no slipping and shifts fine. Would keep an eye on it throughout the week to see if I needed to add more. Continued to check it hot and in idle and got it to the middle of the crosshatched area. However when it sat this past weekend for at least 36 hours the cold reading was an way above the crosshatch area..it was right where the twist is in the dipstick in the DO NOT ADD areameaning it is too full???? It has been driven enough to get the fluid circulated through all the gears and cooling lines. I have no clue as to what is going on. Hoping someone can give some advise.... Thanks | |
 |  |
| ( Join the Elite Explorers ) |
For only $20 per year you can become an Elite Explorer. Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose and fix problems yourself, and learn what modifications really work without having to experiment on your own. Elite Explorer members can change the forum "styles" to see less ads, no green underlined links, and many other benefits such as being able to store 1000 Private Messages, upload photo attachments directly to your posts and more. Join the Elite Explorers today. |
 07-20-2010, 08:43 AM | #2 |
Wannabe Elite Explorer  Quakertown, PA 1999 Explorer XLT 4X4 Join Date: Jun 2010 Posts: 1,190 Mentioned: 0 Post(s) Tagged: 0 Thread(s) Quoted: 24 Post(s) | You should only check when hot in park and at idle. Was engine running when you checked it cold? If the engine wasn't running it will show very high. |
| | |
- Interest bearing checking accounts
- Checking Accounts
- High yield checking account
- High interest checking accounts
- Ford Explorer
- Chat Rooms
- Winter Tires
- Ford explorer forum
| 07-20-2010, 02:00 PM | #3 |
Wannabe Elite Explorer Chicagoland 1997 Ranger 2.3 2wd Join Date: Jul 2010 Posts: 5 Mentioned: 0 Post(s) Tagged: 0 Thread(s) Quoted: 0 Post(s) (Original Poster) | I thought it was supposed to be checked cold without the engine running after it sat for a while (overnight)?? Is this incorrect? Thanks |
| | |
| 07-20-2010, 02:06 PM | #4 |
Wannabe Elite Explorer  Long Island, NY 1994 GMC Yukon 2 Door | Even when checking the level cold the engine is still supposed to be running. Without the engine running the torqueconverter will partly empty and give an incorrect reading. __________________ -James 1992 Ford Explorer XLT 4x4 - Sold 1994 GMC Yukon 2 Door 350 TBI |
| | |
| 07-20-2010, 03:45 PM | #5 |
Wannabe Elite Explorer Quakertown, PA 1999 Explorer XLT 4X4 Join Date: Jun 2010 Posts: 1,190 Mentioned: 0 Post(s) Tagged: 0 Thread(s) Quoted: 24 Post(s) | The correct reading is taken with the trans fluid hot, in park and the engine at idle. What james909 said is correct. |
| | |
| 07-20-2010, 04:36 PM | #6 |
Wannabe Elite Explorer Chicagoland 1997 Ranger 2.3 2wd Join Date: Jul 2010 Posts: 5 Mentioned: 0 Post(s) Tagged: 0 Thread(s) Quoted: 0 Post(s) (Original Poster) | I am confused because the manual states "When the vehicle has not been driven and outside temperature is above 50 F (10 C) the fluid level should be between the holes on the dipstick." Makes it seem like the engine should not be running. Thanks for the replies |
| | |
| 07-20-2010, 04:51 PM | #7 |
Wannabe Elite Explorer Quakertown, PA 1999 Explorer XLT 4X4 Join Date: Jun 2010 Posts: 1,190 Mentioned: 0 Post(s) Tagged: 0 Thread(s) Quoted: 24 Post(s) | Some dip sticks have it stamped on them, my 1999 explorer does, my manual says the same thing also, as far as I know all automatics ford, chevy or other are checked hot with the engine at idle. |
| | |
| 07-20-2010, 05:44 PM | #8 |
Wannabe Elite Explorer Chicagoland 1997 Ranger 2.3 2wd Join Date: Jul 2010 Posts: 5 Mentioned: 0 Post(s) Tagged: 0 Thread(s) Quoted: 0 Post(s) (Original Poster) | Dipstick is stamped to check hot idle. Current hot level is at the bottom of the crosshatch. I was confused as to the cold reading which is extremely high when the engine is not on. I am guessing if i check cold right after I start it up in the morning it should be within the two dots. I will do that tomorrow and post back. Thank you! |
| | |
| 07-21-2010, 11:01 PM | #9 |
Wannabe Elite Explorer Chicagoland 1997 Ranger 2.3 2wd Join Date: Jul 2010 Posts: 5 Mentioned: 0 Post(s) Tagged: 0 Thread(s) Quoted: 0 Post(s) (Original Poster) | Yup...Kept adding and now all is good. I think I would have been fine if that blurb about the cold reading was not there...DUH. Thanks all.... |
No comments:
Post a Comment